8.9 inches 405nm Backlight Module
DLC901 is a 8.9” LCD COB 405nm backlight module developed for 3D LCD printing with well collimated 405nm UV LEDs array. The minimal irradiance after Mono-LCD is over 10mw/cm2. With good irradiance uniformity, DLC901 can well meet the needs of 3D printing for industrial applications.
| Panel | 8.9" LCD |
| Light Source | UV 405nm LED |
| Irradiance after Mono-LCD | ≥10mW/cm2 |
| Illumination Area | 192×120mm2 |
| Working Distance | 130mm |
| Uniformly (9 points Min / Max)) | 95% |
| Module Size | 229.0×132.0×140.0mm3 |
| LED Drive | DC 8A max. (Typical Voltage 29V) |
| Alternative Parameter | Illumination Area Up to 10.1" |